13
© Munters Corporation, August 2021
QM1231r10
Installation Instructions
Chapter 2
Step 10B
Stand cone sections on end and curl ends around to form cone with Cone Support Bracket on outside and tabs
on inside. Insert remaining tabs into slots so tabs are inside cone and fasten final joint using (1) Short Bolt [D]
and Nut [G], with nut on inside of cone. At the inner pair of holes attach (1) Cone Support Bracket to the inner
hole using (1) Short Bolt [D] and Nut [G] with bolt head on inside of cone.
See Figure 10B.
Short Bolt [D]
Cone Support Bracket
Nut [G]
Short Bolt [D]
Nut [G]
Figure 10B
