Munters Element Manual For Use And Maintenance Download Page 78

Page: 78 / 83

Monitoring Functions

•

Viewing the Temperature Data

•

Viewing the Humidity Data

•

Viewing the Water History

•

Viewing the Heater History

•

Viewing the Alarm History

•

Viewing the Event History

17.1 Viewing the Temperature Data

This screen displays the farms temperature data by growth day. Data on this screen is read only.

NOTE

Performing a Cold Start or selecting a

New Group

erases the data.

17.2 Viewing the Humidity Data

This screen displays the farms humidity data by growth day. Data on this screen is read only.

NOTE

Performing a Cold Start or selecting a

New Group

erases the data.

17.3 Viewing the Water History

Go to this screen to view the amount of water distributed.

17.4 Viewing the Heater History

Go to this screen to view the heater activities.

17.5 Viewing the Alarm History

Go to this screen to view the last 999 alarms. Alarms history can display the following alarms.

•

Unknown Alarm

•

Low /High Temperature

•

Sensor # Low/High

•

Temperature

•

High/Low Pressure

•

Water Overflow

•

Water Shortage

•

Outside Temperature Failure

•

Temperature Sensor # Failure

•

Humidity Sensor Failure

Summary of Contents for Element




















































































Search results

Summary of Contents for Element

Reviews:

Brands by name

Popular brands

Munters Element, Manual For Use And Maintenance

Search results

Summary of Contents for Element

Reviews:

Brands by name

Popular brands