Munters ComDry M190Y, Manual

Page: 10 / 32

5. Installation
5.1. Safety
WARNING
All electrical installations must be done by an authorized electrician in accordance with
local regulations. An incorrect installation can cause electrical shock hazards and dam-
age to the unit.
The unit must never be connected to another voltage or frequency than what is speci-
fied on the identification plate. Too high line voltage can cause electrical shock hazards
and damage to the unit.
The unit must be connected to an earthed electrical outlet.
Do not operate the unit if the power cable or plug is damaged, risk of electrical shock.
CAUTION
Do not sit, stand, or place any objects on the unit.
NOTE
When a dehumidifier is placed in a building with radon it is necessary to contact an ex-
pert to secure the best overall solution. All changes affecting the ventilation or the pres-
sure balance in the building can result in a changed concentration of radon.
5.2. Closed system
A closed system is preferable when there is a need for dehumidification to a very dry climate. It is more
economical to run compared to an open system.
The dehumidifier is placed in the space to be dehumidified.
To ensure that the dry air is distributed evenly in the space to be dehumidified a ducting can be connec-
ted to the dry air outlet of the dehumidifier.
The process/reactivation air is taken from the space to be dehumidified. The wet air is transported out-
doors through ducting.
ComDry M190Y Dehumidifier
10