Munters ComDry M190Y, Manual

Page: 7 / 32

WARNING
• The unit must not be splashed with or immersed in water.
• All electrical installations must be done by an authorized electrician in accordance
with local regulations. An incorrect installation can cause electrical shock hazards
and damage to the unit.
• The unit must be connected to an earthed electrical outlet.
• The unit must never be connected to another voltage or frequency than what is
specified on the identification plate. Too high line voltage can cause electrical shock
hazards and damage to the unit.
• The unit can restart automatically without warning following a power cut.
• Do not operate the unit if the power cable or plug is damaged, risk of electrical
shock.
• Do not pull the plug with wet hands, risk of electrical shock.
• Do not insert fingers or any objects into the air vents, rotating fans are inside.
• Do not cover the unit as that can block air intake or outlet and cause a fire.
• If the unit has overturned, cut the power immediately.
• Disconnect the mains plug from the socket before starting any maintenance work.
• If the rotor is to be cut in pieces, wear a suitable CE marked face mask selected and
fitted in accordance with the applicable safety standards to protect from the dust.
2.4. Marking
The identification label is placed on the bottom side of the dehumidifier.
ComDry M190Y Dehumidifier
7