4
5
CCD-0049-000 REV 2
*Room Temperature = 70°F / 21°C **Chilled / Refrigerated = 40°F / 5°C
• Pour the pre-measured amount of water from Measuring Cup directly
into Warming Chamber. Do not overfill. If too much water is used, the
bottle or jar may be heated for too long a period and reach too high
a temperature. Body temperature (98.6°F / 37°C) is ideal as a maximum
warming level. Overfilling may also cause damage to the unit.
• Always place Lift-Out Basket inside Warming Chamber before positioning
your bottle or jar. Never place bottle or jar in Warming Chamber without
using the Lift-Out Basket. Bottle / jar could be damaged or overheated.
• Place bottle or jar into warmer.
• Place Adapter Ring on top of the Lift-out-Basket. If the Adapter Ring
does not fit loosely around the bottle, do not use.
• Press the “ON” button. The Indicator Light will illuminate. This indicates
that the warming cycle has started.
• The heater and light will shut off to indicate that the cycle has been
completed. Remove the bottle / jar at once so that it will not continue
heating.
- If bottle / jar is not warm enough, use slightly more water next time.
- If bottle / jar is too warm, use slightly less water.
• Allow at least 5 minutes for the unit to cool before next use.
INSTRUCTIONS FOR USE
• Place unit on a flat surface away from the reach of children.
• Preheating of the appliance is not necessary.
• The appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended
to fit into a polarized outlet only one way. If the plug does not
fit fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to modify the plug in any way.
a. A short power supply cord is provided to reduce the risk of
becoming entangled in or tripping over a longer cord.
b. Longer detachable power-supply cords or extension cords are
available and may be used if care is exercised in their use.
c. If a longer detachable power-supply cord or extension cord is used,
1. the marked electrical rating of the cord set or extension
cord should be at least as great as the electrical rating of the
appliance, and
2. the cord should be arranged so that it will not drape over
the countertop or tabletop where it can be pulled on by children
or tripped over unintentionally.
To Warm Bottles or Baby Food:
To warm your baby’s bottle or food, please follow the instructions in
the chart provided.
Note: These instructions are to be used as a guide only. Please
note that there are many variables, such as size of the bottle and
starting temperature of the food, which can impact the speed as
well as the final temperature at which this unit warms the bottle
or jar. Adjustments to the instructions below may be necessary.
Always test the temperature of food before feeding baby.
• When ready to begin, insert plug into wall outlet.
• Remove Measuring Cup from its holder and fill it with water to the
appropriate fill line, according to the chart.
Bottle / Jar Style and
Fill Line
Volume of food
(before warming)
4oz. Standard Bottle Room Temperature*
B
4oz. Standard Bottle Chilled / Refrigerated**
E
B
E
5oz. Wide Bottle
Room Temperature
A
5oz. Wide Bottle
Chilled / Refrigerated
4oz. Wide Bottle
Room Temperature
4oz. Wide Bottle
Chilled / Refrigerated
C
8oz. Standard Bottle Room Temperature
B
8oz. Standard Bottle Chilled / Refrigerated
E
9oz. Wide Bottle
Room Temperature
D
9oz. Wide Bottle
Chilled / Refrigerated
A + F
2.5oz. Food Jar
Room Temperature
D
4oz. Food Jar
Room Temperature
D
6oz. Food Jar
Room Temperature
D
Food Temperature
