4
5
INSTRUCTIONS FOR USE
SAVE FOR FUTURE REFERENCE
• Place unit on a flat surface away from the reach of children.
• Preheating of the appliance is not necessary.
• The appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into
a polarized outlet only one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
• A short power-supply cord (or detachable power-supply cord) should be
used to reduce the risk resulting from becoming entangled in or tripping
over a longer cord. longer detachable power-supply cords or extension
cords are available and may be used if care is exercised in their use. If a
longer detachable power-supply cord or extension cord is used:
1. The marked electrical rating of the cord set or extension cord should be at
least as great as the electrical rating of the appliance; and
2. The cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over unintentionally.
To Warm Bottles or Baby Food:
To warm your baby’s bottle or food, please follow the instructions in the
chart on page 6.
Note: These instructions are to be used as a guide only. Please note
that there are many variables, such as size of
the bottle, ambient temperature, and starting
temperature of the food, which can impact the
speed as well as the final temperature at which
this unit warms the bottle or jar. Adjustments to
the instructions below may be necessary. Always
test the temperature of food before feeding baby.
1.
Make sure that the unit is unplugged from the
wall outlet. when ready to begin, remove water
Reservoir from its holder and fill it with water.
Filtered or bottled water will help reduce the
possibility of mineral deposits or limescale build-up
on the heating element.
Fill the unit with water via the water Reservoir only.
Never pour additional water into the warming chamber as it can overflow
outside the unit and create a shock hazard. The water Reservoir does not need
to be filled before each use. You need to fill the reservoir only when it is empty.
2.
In a rapid motion, place water Reservoir back
into the bottle warmer.
3.
Always place lift-Out Basket inside warming
Chamber before positioning your bottle or jar.
Never place bottle or jar in warming Chamber
without using the lift-Out Basket. Bottle / jar could
be damaged or overheated.
4.
Place bottle or jar into warmer. Make sure bottle
or jar does not contact the sides of the lift-Out
Basket to allow the passage of water vapor.
5.
Place Adapter Ring on top of the lift-Out
Basket. If the Adapter Ring does not fit loosely
around the bottle or sit flat on top of the lift-Out
Basket, do not use.
6.
Plug the unit into the wall outlet. Press the On/
Off button once to turn the unit on. Set the time
to the desired duration using the guide on page
5 as a reference. use the “Increase Time” and
“Decrease Time” buttons to add or subtract time.
Press the Start button to initiate the warming cycle.
unit will beep 3 times to indicate the warming cycle
is complete. The heater will shut off automatically.
Remove the bottle / jar at once so that it will
not continue heating. *Many variables affect the
functionality of this product, such as; ambient
temperature, shape of the bottle or food jar,
temperature and volume of the contents. Therefore,
it is imperative that you check the temperature of
the contents before giving them to the child. This can be done by shaking
or stirring the contents first, then tasting the food or placing it on the
inside of your wrist to ensure that it is the appropriate temperature for
your baby. Allow at least 3 minutes for the unit to cool before next use.
Digital memory timer automatically remembers the last timer setting.
1.
2.
3.
4.
5.
6.
CCD-0025-000 REV 2
CCD-0025-000 REV 2
