Multitone RPR 583, Technical Manual

Page: 23 / 91

Z
11:15pm 6:45am
Z
Z
Z
RPR 583
TM1212 Issue 1 Page 2 - 11
2.2.9 Setting the Timed-off Time
This option sets the pager OFF and ON at preset times (e.g. overnight). To select
this option :
a) Select the Set Time screen as shown in paragraph 2.2.7.
b) Use the
¬
or
-
buttons to choose the symbol then push the
O>
button.
The display shows the Timed-off edit screen.
c) To set the Timed-off option to OFF, push the
¬
or
-
buttons until the start
and stop times do not show.
d) To set the Timed-off option to ON, push the
¬
or
-
buttons until the start and
stop times show on the display.
e) To change the START and STOP times:
i) Set the Timed-off option to ON, then push the
O>
button. The first
numbers (Start Time hours) flash. If the clock is set to the 12 hour mode,
the ‘am/pm’ characters also flash.
ii) Push the
¬
or
-
buttons to select the required hour.
iii) Push the
O>
button to select the next number (tens of minutes) then push
the
¬
or
-
buttons to select the required number.
iv) Push the
O>
button again to select the next number (minutes) then push
the
¬
or
-
buttons to select the required number.
v) Push the
O>
button again to select the next number (Stop Time hours).
vi) Repeat operation ii) through iv) to set the required Stop Time hours and
minutes.
vii) To return to the standby screen, push and hold the
O>
button for one
second or wait for the unit to time-out.