Multitone RPR 583, Technical Manual

Page: 17 / 91

RPR 583
TM1212 Issue 1 Page 2 - 5
c) Viewing Archived Messages
To view the messages in the archive, select the archive symbol on the main
menu and push the
O>
button. The display shows the most recent message.
Push the
Í
or the
Ì
button to scroll through the messages. If the message is
more than one screen long, push the
O>
button to display the next screen.
NOTE: If the unit is not programmed to receive information services, push the
Ì
button to select the archive directly from the standby screen.
To return to the standby screen, push and hold the
O>
button for one second
or wait for the unit to time-out and show the standby screen.
2.2.4 Alarm
The alarm can be set to operate once at any time in a twenty four hour period. To
set the alarm:
a) Select the alarm function on the main menu as shown in paragraph 2.2.2.
b) Use the
¬
or
-
buttons to choose the alarm ON or alarm OFF symbol.
When the alarm is set to OFF, the symbol shows and the alarm time is not
shown.
When the alarm is set to ON , the display shows the symbol and also shows
the time the alarm is set to sound.
To change the alarm time:
c) Push the
O>
button and the hour numbers flash. Use the
¬
or
-
buttons to
set the required hour.
d) Push the
O>
button again and the tens of minutes number flashes. Set the
required figure with the
¬
or
-
buttons, then push the
O>
button to make the
minutes number flash. Set the required figure with the
¬
or
-
buttons.
e) To return to the standby screen, push and hold the
O>
button for one second
or wait for the unit to time-out. The standby screen now shows the alarm
symbol to indicate that the alarm is set.
When the alarm time is reached, the standby screen will show a flashing alarm
symbol and the alert will operate for eight seconds. To stop the alert within the eight
second period, push any button.