Multitone RPR 583, Technical Manual

Page: 19 / 91

RPR 583
TM1212 Issue 1 Page 2 - 7
c) To set the audible alert ON or OFF, select the symbol.
i) Use the
¬
or
-
buttons to select the set the audible alert ON or OFF
When the audible alert is ON, the display shows
When the audible alert is OFF, the display shows
NOTE: Beep codes 5 and 8 will override the OFF selection.
ii) When the required selection is made, push and release the
O>
button to
select another option.
d) To set the vibrate alert ON or OFF, select the symbol.
i) Use the
¬
or
-
buttons to select the vibrate alert ON or OFF
When ON is selected, the unit vibrates for a short
time and the display shows
When OFF is selected, the display shows
ii) When the required selection is made, push and release the
O>
button to
select another option.
e) When all the required selections are made, push the
O>
button for one second
or wait for the unit to time out.
f) The display returns to the standby screen:
i) If the audible alert is selected ON, the display shows
ii) If the audible alert is selected OFF, the display shows
iii) If the vibrate alert is selected ON, the display shows
NOTE: If the vibrate alert is selected OFF, the standby display
does not show a symbol.
The audible alert can be quickly set ON or OFF by pushing and holding the
O>
button for three seconds. The audible alert symbol on the standby screen changes
to show the new status of the alert.