Chapter 3 – RouteFinder Software Operation
Multi-Tech RouteFinder RF650VPN User Guide
77
Proxy ARP on This Interface
If you select the Proxy ARP on this Interface checkbox for a network card, the RouteFinder will
automatically announce itself as responsible for all packets to destinations for which it has an Interface
Route. You can use this function to "half-bridge" a network into another LAN segment. NOTE: All packet
filtering rules still apply when Proxy ARP is enabled. This is not a full bridging function !
Local Host
The Default Gateway and the Host Name must be defined for your RouteFinder; the Default Gateway
was already set during initial installation.
1. Enter the name of your RouteFinder into the
Host Name
entry field. For example:
fw.yourdomain.com
.
2. Save the entries by clicking the Save button.
