9
Cabling
Cabling Your MultiVOIP
Cabling your MultiVOIP involves making the proper Power,
Command Port, and Ethernet connections. Figure 6 shows the
back panel connectors and the associated cable connections.
The Cabling Procedure section provides step-by-step
instructions for cabling your MultiVOIP.
Cabling Procedure
1.
Using the supplied cable, connect the power supply to a
live AC outlet, then plug the power supply into the MVP
110 as shown in Figure 3.
Network Connection
Power Connection
Command Port Connection
FXS
Hub
Figure 3. Cable Connections
2.
Connect the MVP 110 to a PC using the RJ-45 to DB9
(female) cable provided with your unit. Plug the RJ-45 end
of the cable into the
Command
port of the MVP 110 and
connect the other end to the PC’s serial port (Figure 3).
3.
Connect a network cable to the
Ethernet 10Base-T
connector on the back of the MVP 110. Connect the other
end of the cable to your network.
4.
If you are connecting a station device such as an analog
telephone, fax machine, or Key Telephone System (KTS)
Summary of Contents for MultiVOIP MVP110
Page 50: ...82050950...
