MultiVOIP Quick Start Guide
16
The default
Frame Type
is
TYPE_II
. If this does not match
your IP network, change the Frame Type by selecting
SNAP
from the
Frame Type
list. The available Frame
Type choices are
TYPE_II
and
SNAP
.
12. In the
Ethernet
group, enter the
IP Address
,
Subnet
Mask
, and
Gateway Address
unique to your IP LAN. The
IP address is the unique LAN IP address assigned to the
MVP110. The Gateway address is the IP address of the
device connecting your MVP110 to the Internet. Click
OK
when you are finished.
13. The
Channel Setup
dialog box displays. The four tabs in
this dialog box define the channel interface, voice/fax
parameters, billing/miscellaneous parameters, and
regional telephone parameters.
The
Inter Digit Time
option defines the maximum amount
of time that the unit will wait before mapping the dialed
digits to an entry in the Phone Directory Database. If too
much time elapses between digits, and the wrong
numbers are mapped, you will hear a rapid busy signal. If
Summary of Contents for MultiVOIP MVP110
Page 50: ...82050950...
