Multitech MultiConnect MTPCIE-BW, Developer'S Manual

Page: 81 / 88

BLUETOOTH DEVELOPER INFORMATION
MultiConnect
®
PCIe MTPCIE-H5/MTPCIE-BW Developer Guide 81
Chapter 17 – Bluetooth Developer Information
If using the MTPCIE Developer Kit with an MT100EOCG and an MTPCIE Bluetooth/Wi-Fi radio, Bluetooth developer
content and sample code are available online at multitech.net.
The following models support Bluetooth/Wi-Fi functionality:
Model Description
MTPCIE-BW Bluetooth/Wi-Fi only
MTPCIE-H5-V-BW HSPA+ with Bluetooth/Wi-Fi
Bluetooth/Wi-Fi
All Wi-Fi and Bluetooth drivers and stacks are based on Linux open source.
For Wi-Fi, use the Linux calibrator tool. The WiFi drivers are compat-wireless drivers for TI WL12XX build
under Linux kernel 2.6.39.4. For more information see
http://linuxwireless.org/en/users/Drivers/wl12xx/calibrator .
For BlueTooth, use the Linux hcitool.
Both tools are currently available inside our embedded Linux systems. These tools do not run on PCs. To invoke the
tools, secure shell into the device using putty or another tool from your Windows computer. Once you secure shell
and login, you can invoke the tools and test. You will need Ethernet connectivity to the development board for the
secure shell and login.
Configuring the MTPCIE-DK1 Developer Board
To use the MTPCIE-DK1 developer board with an MT100EOCG and an MTPCIE Bluetooth/Wi-Fi device:
1. Position jumpers next to USB 3G connector J4 in the 2,3 position.
2. Install the radio and MT100EOCG on the MTPCIE-DK1 developer board and power up the board.
3. Connect the serial cable between the computer’s serial port and the MT100EOCG debug DB9 connector.
4. Run terminal software on the computer with the serial port configured as: 115.2K Bits per second 8 Data
bits None Parity 1 Stop bits None Flow control
5. Power up the MTPCIE-DK1. Linux boots up and the command prompt appears.
6. Enter root as the default user name and password.
Calibrating Wi-Fi and Programming the MAC Address
To calibrate the Wi-Fi and program the MAC address:
1. Attach Wi-Fi/Bluetooth antenna to the MTPCIE.
2. Run the following command on the device:
calibrate-wifi.sh <WIFI-MAC-ADDRESS>
Creating a PPP Connection
For more information, go to www.multitech.net/developer/products/multiconnect-ocg/applications/ppp-peers .