Multitech CommPlete MT5634HD8, User Manual, Page: 73 / 99

E AT Command Summary
CommPlete Communications Server 67
Command Values Description
&K4 .
*** \Q3 RTS/CTS hardware flow control. Same as
&K3 .
S r=n r = 0–8,
10-11, 28,
35, 37, 42-
43, or 89;
n
varies
Set Register Value
Set value of S-register
r to value of n, where n is
entered in decimal format.
S r? r = 0–8
10-11, 28,
35, 37, 42-
43,
or 89 Read Register Value
Read value of S-register
r and display value in 3-digit
decimal form.
&S n n = 0 or 1 Data Set Ready Control
*** &S0 Force DSR high (on).
&S1 Let DSR follow CD.
T In dialing
command *** Tone-Dial
Modem tone-dials numbers following the T.
&T n n = 0, 1, 3 n/a Self-Test Commands
or 6 &T0 Stop any test currently in progress.
&T1 Local analog loop test .
&T3 Local digital loopback test.
&T6 Remote digital loopback test.
\ T n n = 0 Inactivity Timer
*** \T0 Disable inactivity timer.
V In dialing
command Switch to Speakerphone Mode
Switches to speakerphone mode and dials the
following number. Use ATH command to hang up.
V n n = 0 or 1 Result Codes (Verbose/Terse)
V0 Result codes sent as digits (terse response).
*** V1 Result codes sent as words (verbose
response).
& V n/a View Current Configuration
Display the active modem settings.
\ V n n = 0 or 1 Protocol Result Code
\V0 Do not append protocol result code to DCE
speed.
*** \V1 Append protocol result code to DCE speed.
W In dialing Wait for New Dial Tone
command Causes modem to wait for new dial tone. (X2 , X4 ,
X 5 , X6 , or X7 must be selected.)
48 pin