Multitech CommPlete MT5634HD8 User Manual Download Page 58 | Manualshive

Page: 58 / 99

Multitech CommPlete MT5634HD8 User Manual Download Page 58

MT5634HD8 User Guide

52

CommPlete Communications Server

Bulletins

When you log on, the BBS will ask if you would like to view the bulletin menu. The
bulletins are menu-driven; to read a bulletin, enter its number. You can also access
the bulletins by typing

B

at the Main Menu.

About CompuServe

In addition to the BBS, Multi-Tech provides support through CompuServe{xe
"CompuServe"}’s Modem Vendor Forum{xe "technical support"} (GO MODEMVEN)
under GO MULTITECH. You can also download manuals, Help files, drivers,
Microsoft Mail scripts, and product tips and descriptions from the forum’s Multi-
Tech library. Refer to your CompuServe documentation for special operating
procedures.

About the Internet

Multi-Tech is a commercial provider on the Internet{ XE "Internet" }, and we
retrieve e-mail messages from the following mailboxes on a periodic basis:

[email protected]

Technical Support

[email protected]

Marketing Dept.

[email protected]

Sales Dept.

[email protected]

International Marketing & Sales

[email protected]

Publications Dept.

Multi-Tech's presence includes a {xe "World Wide Web"}Web site at:

http://www.multitech.com

and an ftp site at:

ftp://ftp.multitech.com

The ftp server mirrors the Multi-Tech BBS.

About the Multi-Tech Fax-Back Service

Multi-Tech's fax-back { XE "fax-back service" }service provides 24-hour access to
sales, marketing, and technical literature for customers in the USA. Dial (612) 717-
5888, follow the voice prompts, and enter the document number for either the Sales
and Marketing catalog or the Technical Support catalog of documents. For
convenience, write your fax number in the following space:
___________________________________________.

From the Sales and Marketing catalog, you can request to have newsletters, white
papers, press releases, brochures, and other marketing literature faxed to you. From
the Technical Support catalog, you can request basic modem operation information
and troubleshooting guides. With either catalog, simply enter the FB Doc. number
of the literature you wish to receive.

«
...
56
57
58
59
60
...
»

Summary of Contents for CommPlete MT5634HD8




































































































Reviews:

No comments