Multitech CommPlete MT5634HD8, User Manual, Page: 72 / 99

MT5634HD8 User Guide
66 CommPlete Communications Server
Command Values Description
M3 Monitor speaker on during dialing, off during
handshaking.
&M n n = 0 Communications Mode
*** &M0
Asynchronous mode.
N n n = 0 or 1 Modulation Handshake
N0 Modem performs handshake only at
communication standard specified by S37
and the B command.
*** N1 Modem begins handshake at communication
standard specified by S37 and the B
command, but can fallback to a lower speed
during handshake.
\ N n n = 0, 1, 2, 3, Error Correction Mode Selection .
4, 5, or 7 \N0 Non-error correction mode with data
buffering (same as &Q6 ).
\N1 Direct mode.
\N2 MNP reliable mode.
*** \N3 V.42\MNP auto-reliable mode.
\N4 V.42 reliable mode.
\N5 V.42, MNP, or non-error correction. Same as
\N3.
\N6 V.42, MNP, or non-error correction. Same as
\N3.
O n n = 0, 1, or 3 Go Back On Line
O0 Exit online command mode and return to
data mode.
O1 Issue a retrain and return to online data
mode.
O3 Issue a rate renegotiation and return to data
mode.
P In dialing
command Pulse-Dial
Modem pulse-dials numbers that follow P.
Q n n = 0 or 1 Result Codes Enable/Disable
*** Q0 Result codes sent.
Q1 Result codes suppressed (quiet).
&Q n n = 0, 5, or 6 Asynchronous Communications Mode
&Q0 Asynchronous with data buffering. Same as
\N0.
*** &Q5 Error control with data buffering. Same as
\N3.
&Q6 Asynchronous with data buffering. Same as
\N0.
\Q n n = 0, 1, or 3 Local Flow Control Selection
\Q0 Disable flow control. Same as &K0 .
\Q1 XON/XOFF software flow control. Same as