SAFETY INFORMATION
Conduit
®
AP MTCAP2-LNA3-915-042x-POE and MTCAP2-915-042x-POE User Guide
13
Chapter 3 – Safety Information
PoE Safety
Warnings and
Cautions
Warning and Caution symbols mean potential danger.
Warning:
Only trained and qualified personnel should install, replace, or service this equipment.
Disconnect PoE power (Ethernet PoE port) before servicing the device.
Do not work on the system or connect or disconnect cables during periods of lightning activity.
This device is not designed or approved to be used in any Hazardous Locations. Do not install or
operate device if area is known to be an explosive environment.
CAUTION:
Power over Ethernet (PoE) Certification does not apply or extend to voltages outside of standard PoE
range. Any PoE voltages beyond 0vdc to 60Vdc have not been evaluated by UL or MULTITECH. Nominal
PoE voltage is 38 Vdc to 57 VDC. The end user supplies the PoE cable.
Recommended PoE: 802.3at-compliant Type 2 Class 4 Power-over-Ethernet (PoE) Powered
Devices (PDs) and require PoE Power Supply Equipment (PSE) that is 802.3at-compliant with
minimum 25.5W output power capability.
Ethernet port is not designed to be connected to a public Telecommunication (PSTN) or any other
connection other than IEEE 802.3-2012 power over Ethernet devices.
Do not remove product labels.
Ethernet Ports
CAUTION:
Ethernet ports and command ports are not designed to be connected to a public telecommunication
network or used outside the building or campus.
Ports Ethernet
CAUTION:
Les ports Ethernet et de commande ne sont pas conçus pour être raccordés à un réseau de
télécommunications public ou utilisé à l'extérieur du bâtiment.
Handling Precautions
To avoid damage due to the accumulation of static charge, use proper precautions when handling any cellular
device. Although input protection circuitry has been incorporated into the devices to minimize the effect of static
build-up, use proper precautions to avoid exposure to electronic discharge during handling and mounting the
device.
Summary of Contents for 92507603LF
Page 1: ...Conduit AP MTCAP2 LNA3 915 042x POE and MTCAP2 915 042x POE User Guide ...
Page 22: ...MOUNTING THE DEVICE 22 Conduit AP MTCAP2 LNA3 915 042x POE and MTCAP2 915 042x POE User Guide ...
Page 23: ...MOUNTING THE DEVICE Conduit AP MTCAP2 LNA3 915 042x POE and MTCAP2 915 042x POE User Guide 23 ...
