MultiScree
180
Setting the Random Number Limits in Display Mode
Before a random number can be selected, the Production Unit needs to know the
limits of the range that it can choose numbers from, ie. the highest and lowest
possible numbers that can be drawn. This can be done whilst the Production Unit
is running in Display Mode by entering the lowest and highest numbers of the
range using the remote keypad.
[a]
The limits for the current game are remembered from the last time it was
used. To query what high and low number limits are currently set to, press
SHIFT + LOW
or
SHIFT + HIGH
. The current limits will be displayed on
the RNG keypad‟s LCD screen.
[b]
To change the lowest number of the range, enter the new value using the
Production Unit‟s remote RNG keypad. The LCD display will show the
number as it is being entered.
[c]
Press the
LOW
key on remote keypad to enter this number into the system.
The LCD display will display the new low and high number limits.
[d]
Similarly, to change the highest number of the range, enter the new value
on the RNG keypad. The LCD display will show the number as it is being
entered.
[e]
Press the
HIGH
key on remote keypad to enter this number into the system.
The LCD display will again display the new low and high number limits.
[f]
The
key on the remote keypad may be used to correct errors while enter-
ing numbers by deleting the last digit entered. Pressing the
CLEAR
key will
blank out the entire display.
[g]
The Production Unit is now ready for random numbers to be selected from
within the range specified, inclusive of the lowest & highest numbers.
Summary of Contents for In House TV Communication System
Page 1: ...OPERATOR S MANUAL www multiscreen biz info multiscreen biz...
Page 8: ...MultiScree 8...
Page 234: ...MultiScree 234...
