MultiScree
158
Transfer Sequences
When there is more than one MultiScreen unit connected on a network, then it is
possible to transfer sequences between them directly across the network, thus
avoiding the need to use an external storage device.
Transfer Sequences Set-up
Before the transfer of sequences to other units over the network can take place,
your MultiScreen unit needs to be configured so that it is aware of each of the
other MultiScreen units available on the network. This procedure only has to be
done once each time a new MultiScreen unit is added to the network.
[a]
On the MultiScreen unit that will be used for transferring sequences from,
enter the Sequence Editor and then click on the
Config
button. Click on the
Transfer Sequences
button.
[b]
A screen similar to the following will appear :-
Summary of Contents for In House TV Communication System
Page 1: ...OPERATOR S MANUAL www multiscreen biz info multiscreen biz...
Page 8: ...MultiScree 8...
Page 234: ...MultiScree 234...
