MultiScree
139
[b]
Depending on where you want to load your graphics from, you may need to
do one of the following :-
1.
Insert your CD-ROM disc containing graphics into the CD-ROM drive.
2.
Insert your USB flash disk containing graphics into a USB port.
3.
Connect the USB cable supplied with your digital camera to a USB port
and ensure that the camera‟s power is turned on. Make sure that the
camera is set to either USB mode, MEMORY mode, REPLAY mode or
PLAYBACK mode (as usually indicated by a icon) depending on
the brand of your camera.
(
You may need to refer to your camera’s
manual to find out how to do this
.)
[c]
Using the
Load from:
drop-down list, select the location that you want to
load your graphics from, then shortly the names of the graphics available
for loading will appear in a list on screen.
[d]
If your graphics are contained within folders, then double click on the name
of the folder that you want to display the contents of. To return to the parent
folder, left click on the folder icon (with an up arrow) located just to the
right of the filename list.
[e]
Left clicking on the name of a graphic will select that image for loading &
will also display a small preview version of the graphic. Left clicking the
Preview
button beneath the small image will display that image full screen.
Left click again or press the
Esc
key to exit the full screen preview.
[f]
In order to select multiple graphics for loading, hold down the
Ctrl
key
while left clicking on each of the required graphic names. Alternately, to se-
lect a group graphics listed consecutively, left click on the first graphic
name, hold the
Shift
key down then left click on the last graphic name. This
will select all graphics between & including the first and the last chosen. A
quick way to select all of the available graphics is to left click the
Select
All
button. To deselect all currently selected graphics, click on the
Select
None
button.
[g]
Once you have selected the names of the graphics that you want to load, left
click on the
Load
button. You‟ll be asked to confirm the loading of these
graphics which you can do by left clicking on the
Yes
button, or by press-
ing
Enter
.
[h]
The graphics will be transferred from your chosen device into the selected
category, and you‟ll be informed when this has been completed.
[i]
You may now safely remove your USB flash disk, digital camera or CD-
ROM disc from the MultiScreen unit.
[j]
Left click the
Exit
button to return to the Graphics Manager.
Summary of Contents for In House TV Communication System
Page 1: ...OPERATOR S MANUAL www multiscreen biz info multiscreen biz...
Page 8: ...MultiScree 8...
Page 234: ...MultiScree 234...
