MultiScree
111
Setting the Output Frequency
(Note: This feature in not available on MultiScreen Mini units.)
You may need to retune the Production Unit‟s RF output frequency, depending
on what channels are available locally. The output frequency is factory preset to
506.25MHz (Australian Channel 25).
[a]
Open the System Settings editor as described on
[b]
Click the
Set Output Frequency
button. A screen similar to the one shown
below will be displayed :-
[c]
Ensure that the correct country is set by choosing it from the
Location
drop-down menu.
[d]
Next, select the channel you wish to use from the
Channel
drop-down menu
and then click the
Set
button (just below the
Channel
drop-down menu).
[e]
Once you have tested the channel and are satisfied with it, click
Current to
ROM
. The RF output frequency value stored in the ROM will be used each
time that the system boots up. Click
Exit
when you have finished.
Summary of Contents for In House TV Communication System
Page 1: ...OPERATOR S MANUAL www multiscreen biz info multiscreen biz...
Page 8: ...MultiScree 8...
Page 234: ...MultiScree 234...
