MULTIQUIP DA7000SSA2, Operation And Parts Manual

Page: 31 / 160

DA7000SSA2/SSA2GH GENERATOR• OPERATION AND PARTS MANUAL — REV. #0 (03/26/15) — PAGE 31
OPERATION/SHUTDOWN
4. The CS-6369 receptacle is a dual voltage receptacle
(120/240 volts). Using an external voltmeter as shown
in Figure 27, verify that 120/240 VAC is present at the
CS-6369 twist-lock receptacle.
Figure 27. 120/240 CS-6369 Receptacle
5. The L14-30R receptacle is a dual voltage receptacle
(120/240 volts). Using an external voltmeter as shown
in Figure 28, verify that 120/240 VAC is present at the
L14-30R twist-lock receptacle.
Figure 28. 120/240V L14-30R Receptacle
6. Connecting of loads (power tools, lighting ect.) to the
generator receptacles can now be done.
V
240
120
120VAC
X
CS-6369
CS-6369
X
Y
W
Y
W
OF F
V~
V
300 mV
A
A~
V
COM
240 VAC
V
240
120
120VAC
L14-30R
L14-30R
G
X
W
Y
G
X
W
Y
OF F
V~
V
300 mV
A
A~
V
COM
240 VAC
Stopping the Engine (Normal Shutdown)
1. Place
main
circuit breaker (Figure 29) in the
OFF
position.
Figure 29. Main Circuit Breaker (OFF)
2. Place auxiliary circuit breakers (Figure 30) in the OFF
position.
Figure 30. Auxiliary Circuit Breakers (OFF)
3. Place idle control switch switch (Figure 31) in the ON
position.
Figure 31. Idle Control switch (ON)
4. Let engine run at idle with no load for 3-5 minutes.
5. Place the starter switch key (Figure 32) in the
STOP
position and remove the key. Place fuel cock lever in
the
OFF
position.
Figure 32. Starter Switch (Stop Position)
6. Remove all load connections from the generator.
Emergency Shutdown
1. Place starter switch key in STOP position. Remove key.
Place fuel cock lever in the
OFF
position.
ON
I
O
OFF