![background image](http://html.mh-extra.com/html/multiquip/cd6ce13h18/cd6ce13h18_operation-manual_1855305009.webp)
STOW CUTTER 1 CE — OPERATION MANUAL — REV. #2 (12/20/07) — PAGE 9
Figure 1. CUTTER 1 CE Decals
STOW CUTTER 1 CE SAW — RULES FOR SAFE OPERATION
EMERGENCIES
■
ALWAYS
know the location
of the nearest
fire
extinguisher.
■
ALWAYS
know the location of the
nearest
first aid kit.
■
In emergencies
always
know the location of the
nearest phone or
keep a phone on the job site
.
Also know the phone numbers of the
nearest
ambulance
,
doctor,
and
fire department
. This
information will be invaluable in the case of an
emergency.
Saw Transportation Safety
■
DO NOT
use the handle bars and/or front pointer as lifting
points.
■
ALWAYS
use ramps capable of supporting the weight of the
saw and the operator to load and unload the saw. If the saw
must be lifted, always use two people. Never attempt to lift
the saw by yourself.
■
NEVER
attempt to tow the untrailered saw behind a vehicle.
■
DO NOT
use on slopes or on extremely uneven surfaces.
■
NEVER
tip the engine to extreme angles as it may cause oil
to gravitate into the cylinder head making the engine start
difficult.
■
NEVER
transport the saw to or from the job site with the
blade mounted.
Machine Operation And Safety Decals
The CUTTER 1 CE saw is equipped with a number of operation
and safety decals. (Figure 1) Should any of these decals become
unreadable, replacements can be obtained from your dealer.
MODEL
SERIAL NO.
P/N 36099 (ISO Blue)
KEEP HANDS
CLEAR
WARNING!
KEEP FEET
CLEAR
WARNING!
When Larger Blade and Guard
is Installed, Belt Drive MUST
Be Changed to Proper Size.
See Owners Manual.
S.M.I. MASONRY AND CONCRETE
SAW MANUFACTURER’S INSTITUTE
CAUTION
FAILURE TO COMPLY WITH THE C C AH
JADV EEE AV EEA OIEJGGVCBVVZ
P/N 25249-001
P/N 23330-001
P/N 25250-001
P/N 11246
(Sheet-Intl. Stds)
Engine
exhaust
and
some
of
its constituents, and some dust created
of California to cause cancer, birth
defects and other reproductive harm.
by power sanding, sawing, grinding,
drilling and other construction activities
contains chemicals known to the State
Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks.
Cement and other masonry products.
Arsenic and chromium from chemically
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals:
work in a
ALWAYS
well ventilated area, and work with
approved safety equipment, such as
dust masks that are specially designed
to filter out microscopic particles.
ROTATION
ROTATION
P/N 25491
P/N 25678
P/N 22122-001
P/N 25867
CONTACT
PARTS
DEPARTMENT
P/N 13118
P/N 20525
P/N 35167
P/N 11092
P/N 35158
P
OW
DER
C
O
T ED
A
DO NOT OPERATE SAW
WITHOUT PROPER TRAINING
& FULL UNDERSTANDING
OF THE OWNERS MANUAL
HEARING
PROTECTION
KEEP ALL
GUARDS IN
PLACE
EYE OR FACE
PROTECTION
HEAD
PROTECTION
RESPIRATOR
TO PREVENT SERIOUS INJURY
WHEN OPERATING THIS MACHINE
ALWAYS WEAR SAFETY APPROVED
MASONRY AND CONCRETE
SAW MANUFACTURING INSTITUTE
SMI
WARNING
P/N 35137
CUTTER
1
CUTTER
1
P/N 22972-003
6.00 LG
P/N 22972-004
7.00 LG
P/N 23653-001