10
The switch straps are for
Multilane internal use only
and should never be changed from what is
shown in Figure 10.
Figure 10:SPMP Clock Connectors on ML Backplanes 1 and 2
The ML backplane SMPM connectors are shown in lower left picture of
. Cables can
either connect from backplane 1 to backplane 2 or to the family board as shown in
. The
family board connections go up through the G1A Advantest pogo block and are available to be
connected on the DUT loadboard.
Figure 11:SMPM Clock Connectors on Family Board
Referring to
each of the 5 switches on each backplane control the master/slave modes
by one of two methods:
Appendix: Older Revision Backplane Clock Jumper
