[ 10 ]
Personal Safety Warnings
Safety
All equipment from Multifeeder Technology is designed with safety in mind. However, in
order to ensure your safety and the safety of others around you, common sense must
always be used when using this machine. Please read the all of the manuals provided
carefully before operating any of your MFT equipment.
• Do not install or use your MFT equipment without first reading each of the individual
component manuals completely prior to operation.
•
Use proper lifting techniques when removing MFT equipment and associated components
from the shipping box.
•
Always power down equipment before making any adjustment or clearing jams.
•
Never use a knife or sharp instrument to make an adjustment to the MFT equipment, or to
clean or clear jams on the MFT equipment.
•
The MFT equipment may be unplugged in an emergency.
•
Be aware that air cylinder (if equipped) may actuate during power up and power down
sequences.
•
Be aware the MFT could cycle unexpectedly if the MFT equipment is not placed into a safe
mode.
•
Make sure loose jewelry, clothing, long hair, neckties, etc., are properly secured before you
operate the MFT equipment.
•
Always power down the MFT equipment and disconnect the power cord before working with
any of the MFT equipment’s electrical components or when performing maintenance tasks.
•
This machine operates on mains voltage. Contact with this voltage may lead to serious injury,
or death.
•
Do not use the MFT equipment, make mechanical adjustments, or perform maintenance
tasks while under the influence of drugs or alcohol.
Terms/Conditions
Setup
Maintenance
Terminology
Introduction
Safety
