[ 51 ]
Basic menu setting allow the operator control over common adjustments required for basic setup.
More advanced menu settings are available through the password protected Technicians Menu. Press
the
key from the ready screen to access the operator available settings illustrated on the previous
page.
1
Press the
key from the ready screen to access the sub-menu.
2
Press the
key from the sub-menu to access the settings screen and the Product Length
setting. This setting allows the operator to adjust the Product (Label) Length the labeler looks for
when feeding a label.
3
Press the
from the previous screen to enter the Max Jog Speed setting. This setting
allows the operator to adjust the speed the labeler jogs a label when the
key or the
is
pressed.
4
Press the
from the previous screen to enter the Signal Delay setting. This setting allows the
operator to adjust when the labeler begins applying the label. In effect the position of the label on
the product it is applied to.
5
Press the
from the previous screen to enter the Signal Period setting. This setting allows
the operator to adjust how many start signal are ignored before triggering an application cycle.
For example, with the value set to 0, no start signals are ignored and every start signal triggers
an application cycle by the labeler. With a value of 21, 21 start signals are require to trigger an
application cycle.
Continue on the next page.
Terms/Conditions
Maintenance
Safety
Introduction
Terminology
Setup
