22
23
Hardware Diagram Descriptions
Hardware Diagram Descriptions
require DHCP to be enabled on the network,
FRQWDFWVLWH,7VWDIIIRUFRQÀJXUDWLRQ
requirements.
7) Alarm Panel (PANEL)
Connects to the “PSTN”
connection on the alarm panel using a
RJ12 cable. This port can support any
alarm system that communicates using the
Contact ID format.
8) AUX RF Antenna (Inteliswitch Transmitter)
The AUX RF Transmitter is a 433Mhz antenna
for communicating to wireless Inteliswitch
devices. The NTD has an internal antenna
which is used when the device is not
mounted in a metal housing, the extension
cable and mounting is only required when
mounted in a metal box (alarm panel box).
A Multicom Inteliswitch (433.925 Mhz device)
is provided to allow wireless power cycling
of your modem /router during Internet/
network outages. Please contact Multicom
for further details regarding supported
devices. Consideration should be given to
distance between your NTD and Inteliswitch.
200 meters outdoors/50 meters indoors.
9) AUX RF Learn (For Inteliswitch)
Pressing
the AUX button momentarily toggles the
Inteliswitch off then on, which in turn cycles
power to any attached network equipment.
7KH5)/('ÁDVKHVGXULQJFRPPXQLFDWLRQWR
the wireless devices.
10) Ethernet LED (ETH LED)
SOLID ORANGE –
Attempting
connection / initialising
SOLID RED –
No cable detected, or, no
communications possible
SOLID GREEN –
Cable detected (within
poll time), everything is normal
11) RF LED
SOLID GREEN –
Steady state
FLASHING GREEN –
Transmitting to
Inteliswitch
