Description and designation of the major components
Power Unit
This is a microprocessor-based power supply unit for direct current
micromotors able to quickly adjust their operation modes. The
power unit is designated for the operation jointly with the handheld
milling cutter.
The controls and signal functions of the power unit have several
unique features based on the unique technologies by Multibor
Company, and namely:
- Multibor Click-Click
manipulator
- Multibor Magic Button
switch
Thru the 'Multiobr Click-Click' (hereinafter, the 'Manipulator'), it is
possible to:
- switch the rotation on or off
- increase or decrease the rotation speed
- change the rotational direction: 'Reverse' function
- select a control program from the list
Thru the 'Multibor Magic Button' (hereinafter, the 'M-button'), it is
possible to:
- activate the program control mode
- deactivate the program control mode
Attention!
When in the program control mode, such parameters as
output power, maximum torque, protection operating level and the
like are automatically selected and adjusted by the processor in
accordance with the preset algorithms and thus cannot be altered by
the user.
7
Make sure there is some free space around the wall socket, so that
you can quickly unplug the device if necessary. In the event of smoke,
unusual fumes or strange noise near the Milling Cutter, switch it off
immediately, unplug it and refer to the Service Center. Do not place
any items onto the power unit. If any external items or fluids get into
the Milling Cutter, unplug it off immediately and contact the
technical
ATTENTION!
It is prohibited to disassemble or modify any
components of the Milling Cutter. Several parts of the power unit
bear high voltage. It is not allowed to perform any maintenance
procedures not specified in this User Guide.
Do not use any flammable spays near the Milling Cutter.
Do not keep any flammable fluids near the Milling Cutter.
Do not place the Milling Cutter in locations with high humidity or
dust or smoke contents and in locations under direct sunlight as
well as in the vicinity of heating equipment.
The voltage and frequency of the power supply mains
are shown on the device!
