Multibor - Power Control Processor technology
The power control processor precisely controls the correlation of the
selected rpm rate with the output power required to perform a
specific procedure or a type of work. When the nail care master
presses the tool firmer to the surface being treated, the Milling Cutter
does not stop and does not decrease the preset rpm rate; on the
contrary, it keeps those parameters as they are, while overcoming the
resistance of the surface being treated. However, any type of work
has its own precisely limited range of the output power applied.
When the nail care master approaches the permitted limits of the
output power in the course of work, the power control processor
sends an audible warning signal. The nail care master should then
change the working pressure or else the power control processor
would switch off the power supply to the motor. This enables the nail
care master to 'limit the working pressure' and to use the power
reserve more precisely, thus making it possible to prolong the
technological lifespan of the Milling Cutter and to keep it from
overheating under 'hard operation modes' and sustained workloads.
The graph shown below will assist you with better understanding
when you need to select the required speed of rotation depending
on the diameter of the tool applied.
19
Multibor - Suite technology
The quality and the speed of performance of the procedures depend
both on the skills of a master and on the correct combination of the
equipment and materials as well as on the output power of the
milling cutter, the shapes and sharpness of the caps, the tool rotation
speed, and the pressure on the nail plate or the foot of a client. The
Multibor-Suite technology combines the technical capabilities of the
equipment, the specifics of usage of the tools for machine-assisted
nail care, the present-day requirements of a client, and the skills of a
master. Your milling cutter operates according to the Multibor-Suite
technology in the Program Mode. This enables you to use the table
for correct operation of the device in accordance with a pre-selected
program for a specific procedure. The processor will further
automatically select the required speed, the output power, and the
torque, and it will also supervise and control all required changes in
the course of the operation, smoothly adapting to your manner of
performing the procedure.
The additional opportunities of Multibor-Suite
It is only the MULTIBOR Suite Podolog device family that has two
control channels and two connections for two engines, which can be
controlled in turns. This feature would for instance be useful for
chiropodists.
Thru the usage of the additional engine of the NAIL type jointly with
the "Natural Nail" or "Pedicure" programs, it can select the operating
modes for complex podiatric cases.
Besides, MULTIBOR Company can supply the Podolog-type devices
with additional therapeutic engines required for the operation with
the Omnicut heads under the mechanical nail care technology with
cuticles trimmed.
Attention!
The Omnicut head is not included in the package.
This tool should be purchased separately.
