10
Multi-Wave PE653-PE953 Installation Guide
Copyright © 2010 Intermatic, Inc.
24-Volt Valve/Pump Switch
(P4243ME)
Designed as part of the Multi-Wave system and for aftermarket and
retrofit applications, the P4243ME is most suited for controlling up to
two different circuits associated with pool/spa combinations, but can
also be used to control all the equipment typically needed in connection
with water features, water gardening, solar heating, and other similar
applications. This unit snaps into almost any Intermatic enclosure and
controls pumps up to 3HP, 24 volt supply for up to three valve actuators,
automated HIGH/LOW water temperature selector, heater connection
circuit, and push-button control for each load with indicator lights on the
face of the switch. In addition, the unit has connections for a hard-wired
or wireless remote and a master switch controller. For this installation, if an enclosure must be
added, we recommend Intermatic 2T2485GA.
120 or 208-240 input voltage
•
Controls up to three valve actuators
•
Controls two circuits
•
Switches heater thermostat
•
Remote control capabilities
•
Shipping weight – 3 lb. (1.4 kg)
•
Agency approval – CSA/C-US
•
Contact Ratings — Each Circuit
17A Resistive, 120/240 VAC., 50/60 Hz
•
1.5 HP @ 120 VAC., 50/60 Hz
•
3.0 HP @ 240 VAC., 50/60 Hz
•
10 Amp Tungsten, 120/240 VAC., 50/60 Hz
•
Valve Actuator Supply: 24VAC 40VA
•
Optional — Freeze (Air Temperature) Sensor
(178PA28A)
Add the Intermatic Freeze or Air Temperature Sensor (
178PA28A
) to installations
where below-freezing outdoor temperatures are a concern.
