background image

39

Chapter 4 - MultiFRAD Software

MultiFRAD Configuration

The MultiFRAD 3000-Series Setup menu consists of 12 buttons in which you can point and click,
an Events window in the middle of the menu, and a status bar at the bottom of the menu.  The 12
buttons allow you to display and change the protocol stacks, statistics, WAN port setup, Frame
Relay parameters, data port configuration, enable applications such as SNMP Agent, Telnet
Server, WEB Server, and assign a MultiFRAD password.

The Events window, in the center of the dialog box, provides information about the boot process
and ongoing information regarding the status of “events” such as the type of frame relay
management selected and which PVCs become active.  It can be a useful tool in times of
troubleshooting.

The status bar at the bottom displays the status of the unit, e.g., Running, the date that the unit
was configured, the type of connection on the command port, e.g., if the pc connected to the
command port is using its serial port to communicate with the MultiFRAD or if the pc is
communicating with the MultiFRAD via an Ethernet connection.  The last field on the status bar is
the Rights field, which displays either Read/Write or Read only rights.  The first user to
communicate with the MultiFRAD has Read/Write rights.  This enables the first user to change
the configuration of the MultiFRAD.  A second user has read only rights which means they can
only view the configuration of the MultiFRAD.

If your WAN port is configured for frame relay, then the button to its right is Frame Relay.  If your
WAN port is configured for Point-to-Point, then the button to the right is PPP.

Summary of Contents for MultiFrad FR3060










































































































Reviews: