Multi-Tech MultiConnect mDot MTDOT Series, Developer'S Manual

Page: 67 / 69

APPENDIX A RELEASE NOTE ARCHIVE
MultiConnect
®
mDot
TM
MTDOT Developer Guide for Japan 67
Wake Interval (+WI)
Wake Pin (+WP)
Preserve Session
This feature allows you to preserve an AUTO_OTA LoRa Network session across power cycle or reset. The preserve
session feature is applicable only when AT+NJM=2 (AUTO_OTA). However, AT+RS and AT+SS commands can be
used with AT+NJM=1 or 0 (OTA or MANUAL) modes as well.
Related Commands
Preserve Session (+PS)
Restore Saved Session (+RS)
Send using restored session (+SEND)
Save Session (+SS)
AT Commands Added or Changed in Version 1.0
The following AT Commands were added or modified in this release.Refer to the MultiConnect Dot AT Command
Reference for details
Command Function
AT+TXCH Change allows users to now add channels for EU 868MHz models.
AT+ULC New, uplink counter
AT+DLC New, downlink counter
AT+ANT New, antenna gain
AT+JD New, join delay
AT+RXD New, receive delay
AT+TXDR Change to data rate format
AT+SDR New, displays the current data rate
AT+SDCE New, serial data clear on error
AT&K0/3 New, hardware flow control
AT+DC New, device class
AT+AP New, application port
AT+SS New, save network session
AT+RS New, restore network session
AT+PS New, preserve session