Multi-Tech MultiConnect mDot MTDOT Series, Developer'S Manual

Page: 62 / 69

APPENDIX A RELEASE NOTE ARCHIVE
62 MultiConnect
®
mDot
TM
MTDOT Developer Guide for Japan
Changed AT+BLS - Beacon lock status (includes setup example for a class B device).
Changed AT+ACK – now accepts 0-15 as input.
Changed AT&WP - Save Protected settings available in all firmware.
Changed AT+DI - Protected DeviceEUI can be changed.
Changed AT+NI=2,<EUI> - Set default AppEUI/JoinEUI, value if set will be used as the default AT+NI setting
when AT&F is issued.
Changed AT+NK=2,<KEY> - Set default AppKey, value if set will be used as the default AT+NK setting when
AT&F is issued.
Changed AT+DFREQ - Set protected default frequency band, informational use only, provisioned
FrequencyBand.
Changed AT+RXO - New option 3 for EXTENDED HEX format.
For an archive of release notes, go to Appendix A.
What's New in Firmware Version 3.2
The new release includes the following changes:
LoRaWAN Version 1.0.3 Class B support
Russian channel plan support
New and updated AT Commands
LoRaWAN Version 1.0.3 Class B Support
The LoRaWAN Class B option allows devices to open receive windows at fixed time intervals for server-initiated
downlink messages.
New AT Commands: +PP - Ping slot periodicity and +BLS - Beacon lock status
Russian Channel Plan Support
RU864-870 ISM band channel frequencies as described in LoRaWAN Version 1.0.3. This allows devices to operate in
the 864 to 870 MHz frequency band and store parameters for at least eight channels.
AT Command Additions and Modifications
Note: For AT Command details, refer to S000643 DOT Series AT Command Reference Guide .
Deprecated AT+RECVC and AT+RXF in production firmware versions
Deprecated AT+AS.
Added AT+PP - Ping slot periodicity.
Added AT+FO - Frequency offset.
Added AT+GPSTIME - Retrieving GPS synchronized time.
Added AT+BAT - Device battery level.
Added AT+BLS - Get the beacon's lock status
Added AT+LBTRSSI - Listen Before Talk RSSI
Added AT+SENDC - Sends data continuously
Changed AT+RXO - Receive output
For an archive of release notes, go to Appendix A.