Multi-Tech MT5634ZPX, Owner'S Manual

Page: 25 / 108

MT5634ZPX
25
2 Installation
Sound Card Considerations
If you want speakerphone functions along with the ability to
record sound or .WAV files through the sound card at the same
time, you need:
• two stereo PC microphones
• one stereo male-to-male patch cord
• one sound card and optional speakers
To connect a 3rd party sound card, follow the steps below:
1. Obtain a stereo male-to-male patch cord (can be purchased
at a local PC retail store).
2. Place one end of a stereo male-to-male patch cord into the
LINE OUT jack of the MultiModemZPX and the other end
into the LINE IN jack of the sound card. This lets you hear
the activity of the modem, whether it is originating or
answering a call or playing a recorded message using the
bundled Trio software.
3. Place the two stereo microphones (do not use mono
microphones) far enough apart from each other to eliminate
feedback (e.g., one on each side of the monitor). Feedback
only occurs if the microphones are too close to each other.
Make sure speakers are amplified with power source being
either a battery or AC outlet.
4. Place the microphone and speakers far enough apart from
each other to eliminate feedback. Plug the connector of both
microphones into the MIC IN jack of both the SoundCard
and the MultiModemZPX.