10
ISOBUS-TC task processing
Configuring ISOBUS-TC
64
V5.20170221
31302713-02-EN
– After activating the ISOBUS-TC license, you can edit shape prescription maps.
– In ISOBUS-TC, you cannot create any tasks.
▪ "
Extended
" - In this operating mode, the ISOBUS-TC menu is extended. The ISOBUS-TC
license is required. In this mode, ISOBUS-TC serves to manage and process ISO-XML tasks.
Two working methods are possible here.
Working method 1:
– You can manage and process ISO-XML tasks using a Farm Management Information
System.
Working method 2:
– You can create and manage master data yourself in the ISOBUS-TC app.
In these instructions, only the standard mode will be explained. The extended mode is described in
the separate instructions for ISOBUS-TC.
1.
- Open the ISOBUS-TC application.
2.
Tap "Settings".
3.
Tap "Operating Mode".
4.
Tap "Extended" if you want to work with tasks. Tap "Standard" to be able to work without tasks.
5.
- Confirm.
⇨
You will be asked whether you want to change the setting.
6.
Tap "Yes" if you want to confirm this.
⇨
All data will be saved and the operating mode will be switched.
7.
Wait until all messages have faded out.
What happens with the data?
The data structure is different in the two operating modes. After changing the mode, the task and field
data will be saved. When switching again, the stored data will be loaded.
“TC number” parameter
Number of the Task-Controller. For complex systems with multiple terminals and Task-Controllers,
several Task-Controllers can be distinguished based on this number. If need be, you can control
which Task-Controller the connected job computer should communicate with.
“Prefer internal Tractor-ECU?” parameter
This parameter is important on vehicles that have their own Tractor-ECU in addition to the ME
terminal.
Activate the parameter if the GPS receiver is connected to the ME terminal or to the TRACK-Leader
AUTO steering system. Deactivate the parameter if the GPS receiver is connected to a different
terminal.
Procedure
10.1.3
10.1.4
