Muller Elektronik ISOBUS TRAIL-Control, Operator'S Manual

Page: 23 / 37

Configuring TRAIL-Control
When should you configure what?
6
30322332-02-EN V2.20160912 23
Configuring TRAIL-Control
When should you configure what?
The following table shows an overview of the configurable functions and specifications, and shows
when these functions must be configured:
To be configured Initial start-up In other cases
Work mode [
➙
23]
When you are working on a slope or
leaving a slope.
Compensation time [
➙
23]
(optional)
● When changing tractors.
Hydraulic flow [
➙
23]
● When changing tractors.
When the steering starts up abruptly.
Deviation tolerance [
➙
23] ● When changing tractors.
Distance between the rear wheel axle of
the tractor and the towing hook. [
➙
23]
● When changing tractors.
Calibrate the wheel sensor [
➙
29]
● At the start of each season.
When the displayed speed is
incorrect.
Calibrating the TRAIL-Control hydraulic
system [
➙
26]
● When the system is not working
accurately.
Adjusting the configuration to the tractor
As a user, you have the option of changing several parameters. These can slightly influence the
reaction of the system or enable connection to a different tractor.
To call up the parameters:
 Start screen is called up.
1. Switch to the "TRAIL Control" screen:
6
6.1
6.2
Procedure