Basic control principles
Switching on the job computer
5
3030383000-02-EN
V1.20190404
17
Basic control principles
Switching on the job computer
1.
Connect the ISOBUS cable of the job computer to the ISOBUS connector on the tractor.
2.
Start the ISOBUS terminal.
⇨
The job computer is started together with the terminal.
⇨
When starting up for the first time, the job computer initially has to transmit lots of
information to the terminal. This can take a few minutes.
⇨
When all of the data from the job computer application has been loaded, their icon appears
on the terminal:
.
3.
Open the job computer application. To do so, follow the instruction for the ISOBUS terminal.
⇨
The work screen of the job computer appears.
Layout of work screen
The work screen is always shown during operation and informs you of the status of the orchard or
vineyard sprayer.
The work screen is divided into several areas. In each area, information on specific topics may
appear.
When configuring the job computer, the areas can be changed for a orchard or vineyard sprayer
model from a specific manufacturer. For this reason, the following graphs only show the standard
version of the overview.
Areas on the work screen
“
Spray data
” area
“
Boom display
” area with icons beside the
implement image
You can read about the information that appears in these areas in the following sections.
Function icons appear beside the work screen, which perform functions when they are tapped. Their
position and operation depend on the type of ISOBUS terminal.
In the table below, you can see the meaning of the function icons on the work screen.
5
5.1
Procedure
5.2
