9.
Use slotted screwdriver to check thrust ring
at both line ends for secure seating.
10.
Tighten loose thrust ring to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Thrust ring
Tightening torque
5 Nm to 10 Nm
11.
Coat screw head mating face (2) and thread
with engine oil.
12.
Fit hold-down clamp (1) in correct position by hand. Tighten screw (2) to specified initial tightening torque
using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Screw
M12
Preload torque
(Engine oil)
5 Nm to 10 Nm
13.
Fit O-rings (4) and (6) on HP fuel line (5) and coat with assembly compound.
14.
Tighten HP fuel line (5) to specified initial tightening torque.
Name
Size
Type
Lubricant
Value/Standard
HP line
Preload torque
(Engine oil)
5 Nm to 10 Nm
15.
Tighten screw (2) to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Screw
M12
Tightening torque
100 Nm + 10 Nm
M015565/03E 2016-02
| Injector | 89
TIM-ID: 0000000952 - 013
