Centrifugal oil filter, cleaning
and filter-sleeve replacement
1.
Remove clamp (14).
2.
Release cover nut (2) and take off cover (1).
3.
Carefully lift rotor (11), allow oil to drain and
remove from housing.
4.
Holding the rotor (11) firmly, release rotor
cover nut (3).
5.
Take off rotor cover (4).
6.
Remove filter sleeve (6).
7.
Measure thickness of oil residues on filter
sleeve (6).
Result:
Shorten maintenance interval if the oil resi-
dues exceed the maximum thickness of
45 mm.
8.
Disassemble rotor tube (7), conical disk (8)
and rotor base (10).
9.
Wash rotor cover (4), rotor tube (7), conical
disk (8) and rotor base (10) with cold cleaner.
10.
Blow out with compressed air.
11.
Check sealing ring (9), fit new one if necessa-
ry.
12.
Assemble rotor tube (7), conical disk (8) and
rotor base (10) with sealing ring (9).
13.
Insert new filter sleeve (6) in rotor tube (7)
with the smooth paper surface facing the
wall.
14.
Check sealing ring (5), fit new one if necessa-
ry.
15.
Mount rotor cover (4) with sealing ring (5).
16.
Tighten rotor cover nut (3) with torque wrench to the specified torque.
Name
Size
Type
Lubricant
Value/Standard
Nut
Tightening torque
80 Nm ±12 Nm
17.
Place rotor (11) in housing (12) and check for ease of movement.
18.
Check sealing ring (13), fit new one if necessary.
19.
Fit sealing ring (13) on housing (12).
20.
Fit cover (1).
21.
Tighten cover nut (2) by hand.
22.
Install clamp (14) and tighten with torque wrench to the specified torque.
Name
Size
Type
Lubricant
Value/Standard
Clamp
Tightening torque
20 Nm ±3 Nm
23.
Tighten cover nut (2) with torque wrench to the specified torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
Tightening torque
7 Nm ±1 Nm
110 | Oil Filtration / Cooling | M015565/03E 2016-02
TIM-ID: 0000060251 - 001
