Checking diaphragm
1.
Remove cover (4).
2.
Remove spring (5), gasket (2) and dia-
phragm (3).
3.
Check diaphragm (3) for damage, fit new
diaphragm if used one is damaged.
4.
Install diaphragm (3) on housing (1).
5.
Install new seal (2) and spring (5) together
with cover (4).
6.
Use torque wrench to tighten the screws of cover (4) to the specified torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
Tightening torque
(Engine oil)
10 Nm −2 Nm
7.
Check diaphragm in other oil separators in the same manner.
M015655/05E 2015-06
| Task Description | 87
TIM-ID: 0000000017 - 009
