Easy-change fuel filter replace-
ment with the engine stopped
1.
Stop engine and disable engine start.
2.
Cut out the filter to be replaced.
A Both filters are cut in (standard posi-
tion)
B Left filter is cut out
C Right filter is cut out
3.
Unscrew switched off easy-change filter
with oil filter wrench.
4.
Clean sealing surface on filter head.
5.
Check seal on new easy-change filter and
moisten with fuel.
6.
Fit SOLAS shield (→ Page 72).
7.
Install and tighten easy-change filter by
hand.
8.
Set three-way cock to operating position
(A) so that both filters are cut in (operating
position).
9.
Replace further fuel filters in the same way.
10.
Vent fuel system (→ Page 95).
Easy-change fuel filter replace-
ment with the engine running
1.
Cut out filter to be replaced, e.g. turn
three-way cock to position (B) to switch off
the filter (2) to be replaced.
2.
Open threaded vent plug (1) of switched-off
filter at filter head and check that fuel filter
is not under pressure.
Note:
New version has one threaded vent plugs,
old version has two threaded vent plugs.
3.
Close vent plug.
4.
Unscrew switched-off easy-change filter (2)
with oil filter wrench.
5.
Clean sealing surface on filter head.
6.
Check sealing ring on new easy-change fil-
ter (2) and moisten with fuel.
7.
Fit SOLAS shield (→ Page 72).
8.
Bolt on easy-change filter (2) and tighten
by hand.
9.
Set three-way cock to position (A) so that
both filters are cut in (normal position).
10.
Replace further fuel filters in the same way.
M015655/05E 2015-06
| Task Description | 97
TIM-ID: 0000004914 - 006
