MTU 12V 2000 G23 Use And Maintenance Manual Download Page 205

Page: 205 / 214

Engine Governor (Electronic) Control System

6 – 65

6.21.3

ECU – checking plug-in connections

Preconditions

• Engine is stopped and starting disabled.

Special tools

Designation / Use

Part No.

Qty.

Connector pliers

ECU – checking plug-in connections

1. Use connector pliers (3) to make certain that all

plug-in connections of ECU are securely seated.

2. Tighten loose bayonet union nuts (2) with

connector pliers (3) by turning them clockwise
until they lock into place.

3. Ensure that unassigned connector sockets are

protected with covering caps.

M015560

00E 03-05 © MTU

Summary of Contents for 12V 2000 G23























































































































































































































Search results

Summary of Contents for 12V 2000 G23

Reviews:

Related manuals for 12V 2000 G23

Brands by name

Popular brands

MTU 12V 2000 G23, Use And Maintenance Manual

Search results

Summary of Contents for 12V 2000 G23

Reviews:

Related manuals for 12V 2000 G23

Brands by name

Popular brands