MTU 12V 2000 G23 Use And Maintenance Manual Download Page 201

Page: 201 / 214

Engine Mounts

6 – 61

6.19

Engine Mounts

6.19.1

Engine mounts – Resilient elements check

Preconditions

• Engine is stopped and starting disabled.

• Engine is filled with coolant and engine oil.

Engine mounts – Resilient elements check

1. Wipe rubber surface with dry cloth, do not use

organic detergents.

2. Check resilient elements for crack formation and

deformation by visual inspection.

3. Have cracked elements replaced, contact

Service.

Setting dimension check

1. Measure setting dimension:

• Dimension (a) = 55 mm.

2. If dimension (a) is less than 55 mm, resilient elements must be replaced. Contact Service.

M015560

00E 03-05 © MTU

Summary of Contents for 12V 2000 G23























































































































































































































Search results

Summary of Contents for 12V 2000 G23

Reviews:

Brands by name

Popular brands

MTU 12V 2000 G23, Use And Maintenance Manual

Search results

Summary of Contents for 12V 2000 G23

Reviews:

Brands by name

Popular brands