MTU 12V 2000 G23 Use And Maintenance Manual Download Page 165

Page: 165 / 214

Fuel Filter

6 – 25

6.8

Fuel Filter

6.8.1

Fuel filter – Replacement

Preconditions

• Engine is stopped and starting disabled.

Special tools

Designation / Use

Part No.

Qty.

Strap wrench

Material

Designation / Use

Part No.

Qty.

Diesel fuel

Spare parts

Designation / Use

Part No.

Qty.

Easy-change filter

WARNING

Fuels are combustible.

Risk of fire and explosion!

• Avoid naked flames, electrical sparks and ignition sources.

• Do not smoke.

Fuel filter – Replacement

1. Remove easy-change filter using the strap

wrench.

2. Clean the sealing surface on the bracket.
3. Fill the new easy-change filter with clean fuel.
4. Install and tighten new filter by hand.
5. Vent fuel system (

→

Page 6 – 23).

M015560

00E 03-05 © MTU

Summary of Contents for 12V 2000 G23























































































































































































































Search results

Summary of Contents for 12V 2000 G23

Reviews:

Related manuals for 12V 2000 G23

Brands by name

Popular brands

MTU 12V 2000 G23, Use And Maintenance Manual

Search results

Summary of Contents for 12V 2000 G23

Reviews:

Related manuals for 12V 2000 G23

Brands by name

Popular brands