MTU 12V 2000 G23 Use And Maintenance Manual Download Page 166

Page: 166 / 214

6 – 26

Fuel Filter

6.8.2

Fuel prefilter cleaning

Preconditions

• Engine is stopped and starting disabled.

Material

Designation / Use

Part No.

Qty.

Diesel fuel

Spare parts

Designation / Use

Part No.

Qty.

Sealing ring

WARNING

Fuels are combustible.

Risk of fire and explosion!

• Avoid naked flames, electrical sparks and ignition sources.

• Do not smoke.

Fuel prefilter cleaning

1. Shut off fuel supply.
2. Remove nuts from filter head.
3. Take off filter housing and drain fuel into

appropriate container.

4. Remove filter-element securing nut and remove

filter element by pulling it downwards.

5. Wash filter element in clean fuel using a smooth

brush.

6. Wash filter housing with clean fuel.
7. Insert filter element into filter housing and secure

with nut.

8. Place new sealing ring into groove in filter head.
9. Fit cover with seal and secure it with nuts

crosswise.

10. Open fuel supply.

M015560

00E 03-05 © MTU

Summary of Contents for 12V 2000 G23























































































































































































































Search results

Summary of Contents for 12V 2000 G23

Reviews:

Brands by name

Popular brands

MTU 12V 2000 G23, Use And Maintenance Manual

Search results

Summary of Contents for 12V 2000 G23

Reviews:

Brands by name

Popular brands