MTU 12V 2000 G23 Use And Maintenance Manual Download Page 167

Page: 167 / 214

Fuel Filter

6 – 27

6.8.3

Fuel prefilter – differential pressure check and adjustment of gauge

DANGER

Unguarded rotating and moving engine components.

Risk of serious injury – danger to life!

• Take special care when working on a running engine.

WARNING

Engine noise above 85 dB (A).

Risk of damage to hearing!

• Wear ear protectors.

Setting adjustable pointer of differential pressure
gauge

1. After installation of a new filter element, align

adjustable pointer (2) with pressure-indicating

pointer (3) of pressure gauge (1).

2. Verify that differential pressure is within the limit.

Fuel prefilter – checking differential pressure

1. With the engine running at full load or rated power, read off pressure at gauge (1).
2. If differential pressure as indicated between position of adjustable pointer (2) and pressure-indicating pointer

(3) of pressure gauge is

≥

0.3 bar, flush filter element of the cut-in filter (

→

Page 6 – 30).

M015560

00E 03-05 © MTU

Summary of Contents for 12V 2000 G23























































































































































































































Search results

Summary of Contents for 12V 2000 G23

Reviews:

Related manuals for 12V 2000 G23

Brands by name

Popular brands

MTU 12V 2000 G23, Use And Maintenance Manual

Search results

Summary of Contents for 12V 2000 G23

Reviews:

Related manuals for 12V 2000 G23

Brands by name

Popular brands