Fault code no. Description
Meaning
Action
No. of as-
sociated
parameter
190
AL EMU Parameter Not
Supported
Alarm configuration; EMU pa-
rameters not supported.
Notify Service.
2.0500.69
0
201
SD T Coolant
Sensor B06 defective (cool-
ant temperature).
1. Check wiring.
2. Replace if neces-
sary.
1.8004.57
0
202
SD T Fuel
Sensor B33 defective (fuel
temperature).
1. Check wiring.
2. Replace if neces-
sary.
1.8004.57
2
203
SD T Charge Air
Sensor B09 defective
(charge air temperature), A-
side.
1. Check wiring.
2. Replace if neces-
sary.
1.8004.57
1
204
SD T-Coolant Intercooler
Sensor B26 defective
(charge-air coolant tempera-
ture).
1. Check wiring.
2. Replace if neces-
sary.
1.8004.57
4
205
SD T-Exhaust A
Sensor B4.21 defective (ex-
haust temperature), engine
side A.
1. Check wiring.
2. Replace if neces-
sary.
1.8004.57
6
206
SD T-Exhaust B
Sensor B4.22 defective (ex-
haust temperature), engine
side B.
1. Check wiring.
2. Replace if neces-
sary.
1.8004.57
7
208
SD P Charge Air
SD alarm configuration
charge air pressure sensor
(B10) defective, short circuit
or wiring break
Check sensor and
wiring, replace as
necessary. Fault is
cleared when en-
gine restarted.
1.8004.56
6
211
SD P Lube Oil
Sensor B05 defective (engine
oil pressure).
1. Check wiring.
2. Replace if neces-
sary.
1.8004.56
3
212
SD P-Coolant
Sensor B16 defective (cool-
ant pressure).
1. Check wiring.
2. Replace if neces-
sary.
1.8004.56
4
213
SD P-Coolant Intercool-
er
Sensor B43 defective (inter-
cooler coolant pressure sen-
sor defective).
1. Check wiring.
2. Replace if neces-
sary.
1.8004.56
9
214
SD P-CrankCase
Sensor B50 SD defective
(crankcase pressure sensor).
1. Check wiring.
2. Replace if neces-
sary.
1.8004.56
8
215
SD P-HD
Sensor B48 defective (high-
pressure regulator rail pres-
sure sensor); emergency
mode active.
1. Check wiring.
2. Replace if neces-
sary.
1.8004.56
7
216
SD T Lube Oil
Sensor B07 defective (engine
oil temperature).
1. Check wiring.
2. Replace if neces-
sary.
1.8004.57
5
219
SD T-Intake Air
Sensor B03 defective (intake
air temperature).
1. Check wiring.
2. Replace if neces-
sary.
1.8004.57
3
220
SD Coolant Level
Sensor F33 defective (cool-
ant level 1).
1. Switch system
OFF and ON again;
1.8004.58
4
MS150027/02E 2013-02
| Troubleshooting | 47
TIM-ID: 0000008507 - 003
