16
Temposonics
®
ET Analog ATEX / IECEx / CEC / NEC / CCC Certified
Operation Manual
Manuals, Software & 3D Models available at:
www.mtssensors.com
Cables
Tefl on
®
cable
Part no. 530 112
Silicone cable
Part no. 530 113
Name of cable in order code:
T
Name of cable in order code:
V
Material: Tefl on
®
jacket; black
Features: Twisted pair, shielded, fl exible,
high thermal resistance, mostly oil &
acid resistant
Cable Ø: 7.6 mm (0.3 in.)
Cross section: 4 × 2 × 0.25 mm²
Bending radius: 8 – 10 × D
(fi xed installation)
Operating temperature:
−100…+180 °C (−148…+356 °F)
Material: Silicone jacket; red
Features: Twisted pair, shielded, highly
fl exible, halogen free, high thermical
resistance
Cable Ø: 7.2 mm (0.28 in.)
Cross section: 3 × 2 × 0.25 mm²
Bending radius: 5 × D
(fi xed installation)
Operating temperature:
−50…+180 °C (−58…+356 °F)
Programming tools (
Not approved for use in hazardous environments
)
Hand programmer for analog output
Part no. 253 124
Programming kit
Part no. 254 555
Cabinet programmer for analog output
Part no. 253 408
Easy teach-in-setups of stroke length
and direction on desired zero / span
positions. For sensors with 1 magnet.
Kit includes:
1 × interface converter box
1 × power supply
1 × cable (60 cm) with M12 female
connector (5 pin), straight – D-sub
female connector (9 pin), straight
1 × cable (60 cm) with M16 female
connector (6 pin), straight – D-sub
female connector (9 pin), straight
1 × cable (60 cm) with 3 × terminal
clamp – D-sub female connector
(9 pin), straight
1 × USB cable
Software is available at:
www.mtssensors.com
Features snap-in mounting on
standard DIN rail (35 mm). This
programmer can be permanently
mounted in a control cabinet and
includes a program/run switch.
For sensors with 1 magnet.
Controlling design dimensions are in millimeters and measurements in ( ) are in inches
4.8 Frequently ordered accessories for analog output
Summary of Contents for Temposonics E Series
Page 32: ......
