background image

12.  Environment 
 

 

Do not dispose electrical appliances as unsorted municipal waste, use separate 
collection facilities. 

 

Contact your local government for information regarding the collection systems 
available. 

 

If electrical appliances are disposed of in landfills or dumps, hazardous substances 
can leak into the ground water and get into the food chain, damaging your health 
and well-being. 

 

When replacing old appliances with new ones, the retailer is legally obligated to 
take back your old appliance for disposal at least for free of charge. 

 

13.  Ingress protection (IP) ratings 

 

 

Ingress protection numbers are used to specify the environmental protection – 
electrical enclosure – of electrical equipment. 

 

The IP rating normally has two numbers: 

1.

 

The first number – protection against solid objects. 

2.

 

The second number – protection against liquids. 

 

IP64: 

The instrument is totally protected against dust and against water sprayed from all  
directions. 

 

Warranty Clause 

MTP  Instruments

  warrants  this  instrument  to  be  free  of  defects  in  parts  and 

workmanship for one (1) year from date of shipment.  This warranty does not apply to 
defects  resulting  from  action  of  the  user  such  as  misuse,  improper  wiring,  operation 
outside of specification, improper maintenance or repair, or unauthorized modification.  

MTP  Instruments

 specifically disclaims any implied warranties or merchantability or 

fitness  for  a  specific  purpose  and  will  not  be  held  liable  for  any  direct,  indirect, 
incidental  or  consequential  damages.   

MTP  Instruments

  total  liability  is  limited  to 

repair or replacement of the product. 
 
 
 
 
 
 
 
 
 
 
 

11 

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for MTP-1032















Reviews: