MTP MTP-1032, Instruction Manual

Page: 12 / 14

9. Cleaning and Storage
CAUTION
 Use a lightly damp cloth with neutral detergent for cleaning the instrument. Do not
use abrasive or solvents.
 Do not expose the instrument to the direct sun, high temperature and humidity or
dew.
 Put the probe protection cover on the tips while not in use. Otherwise, it may cause
an injury.
 Remove batteries when the instrument is not being used for a long period.
 Do not install the battery case without batteries.
 Operate this unit strictly according to the manual instructions.
10. Safety symbol
Always check proper operation of the device on a known working circuit before
using.
Equipment protected throughout by double insulation or reinforced insulation.
Caution! Risk of electric shock. Under normal use, hazardous voltages may be
present.
Alternating current.
Both direct and alternating current.
11. Measurement Category

Category IV: is for measurements performed at the source of the low-voltage
installation.
.
10
www. .com
information@itm.com 1.800.561.8187